01
UL standard
Panels built to the UL standard — Underwriters Laboratories. An internationally recognized certification for electrical equipment.
[ 14 ]/Control Panels
Built to UL standards.
One of the services we offer at HG Control y Automatización is the assembly of control panels built to UL standards and to the specifications of our clients or of various global brands.
ClosedMCC · 6 sections
Six-section Motor Control Center built at the HG shop.
Hover to see insideTap to see inside
Technical document
Control Panels Catalog
PDF with panel types, technical specifications and the manufacturing process.
PDF · 755 KBDownload
ClosedDrives · Double enclosure
Danfoss variable frequency drives, protections and terminal blocks labeled one by one.
Hover to see insideTap to see inside
ClosedPower · 480 V
Disconnect switch, contactors and shielded busbars with high-voltage signage.
Hover to see insideTap to see inside
ClosedFull line · HG shop
Finished line of panels on the floor, ready for testing and shipping.
Hover to see insideTap to see inside
Features
What every panel includes.
02
Customization
Design and assembly to the client's specific requirements. Any configuration, any size, any protection rating.
03
Global brands
Compatible with the specifications of Schneider Electric, Rockwell, Siemens, ABB, Allen-Bradley and other manufacturers.
04
Pre-delivery testing
Every panel is tested under load before delivery to the client. A complete operating simulation in our shop.
Types
Four families of panels.
Intelligent MCCs
Motor Control Centers with starters requiring communication as needed by the client. Ethernet, Modbus, PROFINET.
Fixed MCCs
Motor Control Centers with full-voltage or soft starters. The rugged, time-proven option.
Power panels
Industrial power distribution. Any rating, any number of circuits, configurable NEMA enclosure.
Control panels
PLCs, HMI, instrumentation, telemetry. Engineered to operate 20+ years in the plant.
Process
Six steps from idea to startup.
- 01
Technical meeting
Requirements gathering with your engineering team.
- 02
Design + diagram
Detailed electrical drawings, bill of materials, specifications.
- 03
Approval
Validation of the drawings with you before manufacturing begins.
- 04
Manufacturing
Shop assembly to the UL standard using global brands.
- 05
FAT testing
Factory Acceptance Test under simulated load before shipping.
- 06
Installation + startup
Supervision of the mounting and commissioning on site.
Need a custom panel?
You will hear back from an engineer — not from a form. Tell us what you need to control and we will send you a design within a few days.